Straight Centrifugal Grinding Mill

Key features of the Straight Centrifugal Grinder (Compared with the Raymond Mill, there are the following advantages)
1. Save The amount of energy consumption which the straight centrifugal grinder's
blower consuming is only 6% of mill, but Raymond Pulverize is 81%. In addition,the consumed energy when the spiller slide the Stone (http://g603.net) occupy whole energy is 25%,
but straight centrifugal grinder is no exist this consume.

2.High-efficient In same condition, the grinding roller of straight centrifugal grinder
can be through a large 2.3 times area than Raymond Pulverize .

3.High-using rate Grinding roller and (http://maplered.com) grinding ring of Raymond Pulverize are sunken
in middle parts, so the metal amount that discarded is only 35% of originalweight, but materiel in straight centrifugal grinder fall from top to bottom, so the metal amount can reach a high to 55%.

4. Accident insurance If bolt or iron ore fall into the Raymond Pulverize, this will conduce to breaking shovel, roller suspender transmutation. But straight centrifugal grinder will not appear such condition.

5.Well using against high hardness and (http://maplered.com) hard-process Material (http://g654.org) Some high-rigidity Material (http://g654.org) , such as carborundum, corundum, zirconium, the output will fall down because the grinding roller and (http://maplered.com) grinding ring of Raymond Pulverize are sunken in middle parts. But in straight centrifugal grinder, it skives Material (http://g654.org) up and (http://maplered.com) down equably, so the output shows much more stabilization.

6.Wet production Water is allowed using in Straight centrifugal grinder.

7.Occupation of area is small It does not need to allocate whirlwind separator and (http://maplered.com)
a lot of pipelines .etc, so the occupation of land (http://maplered.com) space is small.

Application

This straight centrifugual grining mill applies to grind Material (http://g654.org) into thick powder. It's mainly used in the mining, construction Material (http://g654.org) s, chemical, and (http://maplered.com) metallurgy. Can be pressed various
kinds of not flammable and (http://maplered.com) not explosive supplies crushed, for example, carborundum,
and (http://maplered.com) Zircon sand (http://maplered.com) , Quartz, Granite, Barite, Marble, LimeStone (http://g603.net) , Steatite, Plastermodel, Scoria, Chinaware, Glass. Can crush Material (http://g654.org) below scale 9.5 of Moh'shardness.Operation principleAmong the working process, motor brings along milling wheel rack to circumgyrate
through trigonometry wheel and (http://maplered.com) center axle. That axle hoist at rubbing roller hanger
to rub through bearing roller rub roller hanger while rotating at the sametime cross arm, roll along the round while rubbing the roller. The cubic supplies is separated by umbellate hammer and (http://maplered.com) plate, fall symmetrically between the roller and (http://maplered.com) ring. And after pulverizing arranging from cannulation underlayer. The dustremoval air blower make minus-press for the inlet and (http://maplered.com) outlet. There is no dustcontamination and (http://maplered.com) at the same time it debars the quantity of heat in the machine. Production with water: the comminution process is almost the same as dry production.
The difference is: comminution with water, and (http://maplered.com) the separate quomodo with water.This can be designed by clients need.

Technique parameter of Straight Centrifugal Grinder

Type	Max. Feed size(mm)	Product size(mm)	Capacity(t/h)	Power of Main motor(Kw)	Dimension(mm)
ZTM86	16	0-2.8	7-11	37	2600×2100×2400
ZTM 125	25	0.044-5	15-55	90-110	Φ2300×5600
ZTM 165	35	0.044-5	30-120	185-200	Φ3600×8200

Note: 1.The average size of product is adjustable 2.The capacity is that feeding Material (http://g654.org) s are not through the classifier and (http://maplered.com) 90%the size of feeding Material (http://g654.org) s are smaller then 2.8mm.

Straight Centrifugal Grinding Mill,grinding mill, mill,,China manufacturer, exporter, suppliers, wholesaler, distributor

China null of Straight Centrifugal Grinding Mill. Get Straight Centrifugal Grinding Mill from suppliers like Shanghai Shibang Machinery Co., Ltd. on Stone.cc.